Menu Close

Devices

Manufacturer Device name Device type
ASI MS2000 Positioning system
Name of module in LabMULE:Core: ASI-MS2000

The current version of this module allows for the control of the following functions:
    • Up to 3 axes
    • Enable/disable single axis
    • Home axes
    • Read current position
    • Move absolute
    • Set current position as zero
    • Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample)
    • Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements)
Agilent 33621A waveform generator Pulse generator
Name of module in LabMULE:Core: Keysight_33621A
Agilent 81130 Pulse generator Pulse generator
Name of module in LabMULE:Core: Keysight_81130A_PulseGen

The current version of this module allows for the control of the following functions:
  • Set frequency/periodSet pulse width/delay per channelSet high/low voltage per channel
Agilent DSO-X Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope

The current version of this module allows for the control of the following functions:
  • Activate channels
  • Read out traces from activated channels
  • Continuous readout
Agilent E82XX-series RF source (E8241A, E8244A, E8251A, E8254A, E8247C, E8257C, E8267C, E8257D, E8267D) RF source
Name of module in thaTEC:Core: Agilent_E8257D

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set output power
  • Switch RF output on/off
  • Enable pulse modulation
  • Set pulse width/delay/period/rate
  • Dynamically set frequency via remote parameter
Agilent N51XX-series RF source (N5181A, N5182A, N5183A, N5161A, N5162A, N5171B, N5172B, N5181B, N5182B, N5173B, N5183B) RF source
Name of module in thaTEC:Core: Agilent_E8257D

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set output power
  • Switch RF output on/off
  • Enable pulse modulation
  • Set pulse width/delay/period/rate
  • Dynamically set frequency via remote parameter
Agilent N52XX series VNA (N5225A, N5221B, N5222B, N5224B, N5225B, N5227B, N5231B, N5232B, N5234B, N5235B, N5239B, N5230C, N5241B, N5242B, N5244B, N5245B, N5247B, N5249B) Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Keysight_N52xx_VNA

The current version of this module allows for the control of the following functions:
  • Read all S-Parameters (real and imaginary)
  • Set center frequency by equation and device parameter from another device (e.g. Hall-probe)
  • Set start/stop frequency
  • Set number of points
  • Set averages
  • Set output power
  • Switch output on/off
  • Activate traces
  • Take reference
  • Display raw/corrected data (using reference data)
  • Continuous readout
  • Unleveled indicator
Agilent N6700 series (N6776A) Power supply
Name of module in thaTEC:Core: Agilent_N6776A

The current version of this module allows for the control of the following functions:
  • Set current
  • Switch output
  • Set software limits
  • Set voltage protection level
  • Current ramping: set stepsize and timing
Agilent N9010A spectrum analyzer Signal analyzer
Name of module in thaTEC:Core: Keysight_N9010A

The current version of this module allows for the control of the following functions:
  • Set center frequency
  • Set frequency span
  • Set measurement type
  • Display traces
  • Set trace type/trace name/detector type
  • Set average mode and number
  • Set number of sweep points
  • Set input impedance
  • Set amplitude units
  • Set bandwidth
  • Set attenuation and reference level
Ametek 7230 Lock-in amplifier
Name of module in thaTEC:Core: Ametek_7230_lock-in

The current version of this module allows for the control of the following functions:
  • Set all input parameters
  • Set filter time constant and slope
  • Set sensitivity
  • Set gain
  • Set display and data type
  • Continuous readout on/off
  • Set all reference channel parameters
  • Set notch filter frequency
Ametek 7265 Dual Phase DSP Lock-in Amplifier Lock-in amplifier
Name of module in thaTEC:Core: Ametek_7265_lock-in

The current version of this module allows for the control of the following functions:
  • Set contuous readout
  • Set input mode (single-ended
  • differential
  • inverted
  • current input)
  • Readout Channel 1 and 2 with different readout-modes
AnaPico APSIN series RF source
Name of module in thaTEC:Core: BNC845

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set RF power
  • Enable/Disable modulation
  • Set modulation type/source
  • Set pulse period/width/polarity
  • Set amplitude modulation frequency/depth/waveform
Anritsu 68369A RF source
Name of module in thaTEC:Core: Anritsu_68369

The current version of this module allows for the control of the following functions:
  • Set frequency and output power
  • Switch output
  • Internal modulation settings
  • External pulse modulation settings
Anritsu MG3692C RF source
Name of module in thaTEC:Core: Anritsu_MG369xC-series

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set RF power
  • Set trigger source/trigger type/trigger edge type/clock rate
  • Enable pulse modulation
  • Set pulse delay/width/period/frequency/polarity
Anritsu MS2830A, MS2690A, MS2691A, MS2692A Signal analyzer
Name of module in thaTEC:Core: Anritsu_MS269Xa_MS2830A_SpectrumAnalyzer

The current version of this module allows for the control of the following functions:
  • Set start/stop frequency
  • Set number of points
  • Ser averages
  • Set storage mode (Average – Min hold – max hold – linear average)
  • Take reference (selectable math operation for reference)
  • Set resolution bandwidth filter
  • Set video bandwidth filter
Anritsu MS46XX-series VNA (MS4632A, MS4633A, MS4634A, MS4632A, MS4642A, MS4644A, MS4645A, MS4647A, MS4642B, MS4644B, MS4645B, MS4647B) Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Anritsu_MS46xx_VNA

The current version of this module allows for the control of the following functions:
  • Read all S-Parameters (real and imaginary)
  • Set center frequency by equation and device parameter from another device (e.g. Hall-probe)
  • Set start/stop frequency
  • Set number of points
  • Set averages
  • Set output power
  • Switch output on/off
  • Activate traces
  • Take reference
  • Display raw/corrected data (using reference data)
  • Continuous readout
  • Unleveled indicator
Anritsu MS46XXX-series, MS46122B, MS46131A, MS46322B,MS46522B,MS46524B Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Anritsu_ShockLine_MS46xxx_VNA

Remarks: S12

The current version of this module allows for the control of the following functions:
  • Set start/stop frequency
  • Set number of points per spectrum
  • Set averages
  • Set output power and toggle output
  • Select recorded traces (S11
Any Universal camera module (NI Vision license required) Camera
Name of module in thaTEC:Core: camera

Remarks: NI Vision license required!

The current version of this module allows for the control of the following functions:
  • Calibrate
  • Measure distances
  • Zoom
  • Export live image
  • Set framerate
  • Set gain
  • Set exposure time
Berkeley Nucleonics 845 RF source
Name of module in thaTEC:Core: BNC845

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set RF power
  • Enable/Disable modulation
  • Set modulation type/source
  • Set pulse period/width/polarity
  • Set amplitude modulation frequency/depth/waveform
Berkeley Nucleonics S1365 Signal analyzer
Name of module in thaTEC:Core: BNC_spectrumanalyzer
Bruker Bruker power supply (several series) Power supply
Name of module in thaTEC:Core: Bruker_power_supply

The current version of this module allows for the control of the following functions:
  • Set current
  • Readout actual current
  • Set software current limits
  • Shift mode to shift current by a certain amount (e.g. for taking reference signals for VNA-FMR measurements)
Cobolt 05-01 series (Zouk, Twist, Calypso, Fandango, Samba, Jive, Bolero, Flamenco, Rumba) Laser
Name of module in thaTEC:Core: Cobolt_lasers

Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on

The current version of this module allows for the control of the following functions:
  • Set laser power (will switch laser into constant power mode)
  • Set drive current (will switch laser into constant current mode)
  • Read out current laser power/drive current
  • Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status)
  • Display device info (serial number/operating hours/faults)
Cobolt 04-01 series (Zouk, Twist, Calypso, Fandango, Samba, Jive, Bolero, Flamenco, Rumba) Laser
Name of module in thaTEC:Core: Cobolt_lasers

Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on

The current version of this module allows for the control of the following functions:
  • Set laser power (will switch laser into constant power mode)
  • Set drive current (will switch laser into constant current mode)
  • Read out current laser power/drive current
  • Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status)
  • Display device info (serial number/operating hours/faults)
Coherent Sapphire Laser
Name of module in thaTEC:Core: Coherent_Sapphire
CryoVac TIC 500 temperature controller Temperature controller
Name of module in thaTEC:Core: CryoVac_TIC-500_Temperature-controller

The current version of this module allows for the control of the following functions:
  • Read all 4 sensor inputs
  • Set setpoints of both heater outputs
  • Edit PID settings
  • Read analog inputs
  • Set analog outputs
Eurotherm ET-3500 series Temperature controller
Name of module in thaTEC:Core: Eurotherm_3500-series

Remarks: For initial setup, please refer to the changelog of the module.

The current version of this module allows for the control of the following functions:
  • Change setpoint
  • Set maximum temperature rate
  • Read-out current temperature
  • Temperatur vs. time graph
FAST ComTec MCS6A (USB version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5 Timeresolution
Name of module in thaTEC:Core: MCS6A
FAST ComTec P7887 (PCI version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5 Timeresolution
Name of module in thaTEC:Core: P7887
FLIR BlackFly (NI Vision license required), Chameleon (NI Vision license required), Flea (NI Vision license required) Camera
Name of module in thaTEC:Core: camera
GMW 5972 magnet control Power supply
Name of module in thaTEC:Core: GMW_Magnet-control-5972

The current version of this module allows for the control of the following functions:
  • Read current output values (voltage and current)
  • Read current field
  • Read current temperature
  • Set output mode (open or closed loop or hybrid mode)
  • Set output current/target field with a given precision
  • Create OLC
  • Edit hardware settings and PID settings
GMW MC-XYZT Motion control Positioning system
Name of module in thaTEC:Core: GMW_Velmex_MotionControl

The current version of this module allows for the control of the following functions:
  • Read and set absolute position of all 4 axes
  • Indicator if stage is homed
  • Relative movement relative to defined position
GWInstek GPD-x303S series Power supply
Name of module in thaTEC:Core: GWInstek_GPD-X303S_series

The current version of this module allows for the control of the following functions:
  • Set output current and voltage
Group3 DTM series Gaussmeter
Name of module in thaTEC:Core: Group3_DTM

The current version of this module allows for the control of the following functions:
  • Read field.Set units
  • Set field ranges
  • Autorange on/off
  • Continuous readout on/off
Hamamatsu ImagEM X2 Detector
Name of module in thaTEC:Core: Hamamatsu_Image_EM_X2

The current version of this module allows for the control of the following functions:
  • Set gain
  • Set exposure time
  • Set readout speed
  • Set readout direction
  • Capture and display image
  • Set crop area via cursors in the image
  • Display device info (model/temperature)
Hamamatsu ORCA series Detector
Name of module in thaTEC:Core: Hamamatsu-ORCA

The current version of this module allows for the control of the following functions:
  • Set exposure time
  • Set readout speed
  • Set readout direction
  • Capture and display image
  • Set crop area via cursors in the image
  • Display device info (model/temperature)
Keithley 2000 Multimeter
Name of module in thaTEC:Core: Keithley_2000
Keithley 2182A Nanovoltmeter Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Keithley 2200xx-series multi channel lab power supplies,2231A-30-3 Power supply
Name of module in thaTEC:Core: Keithley_22XX-series_power-supply

The current version of this module allows for the control of the following functions:
  • Set output value and switch output of all channels individually
Keithley 22xx series (2220, 2230, 2231) Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley 2400 series Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Keithley 2614B Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B

The current version of this module allows for the control of the following functions:
  • Enable/disable outputs
  • Switch mode for each output
  • Set current/voltage for each output
  • Set current range/voltage limmit for each channel
  • Set maximum/minimum current for each channel
  • Read resistance for each output
  • Plot resistance over time
  • Export time-resistance plots
Keithley 6200 series (6221) Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Keithley DMM 6500 Multimeter
Name of module in thaTEC:Core: Keithley_DMM_6500_multimeter

Remarks: current

The current version of this module allows for the control of the following functions:
  • Read and display voltage/current
  • Plot values over time
  • Set auto or manual range
  • Set input impedance
  • Set function (voltage DC/AC
Kepco BOP series (via GPIB) (BOP 100W, BOP 200W, BOP 400W) Power supply
Name of module in thaTEC:Core: Kepco_GPIB

Remarks: Only for power supplies with GPIB connection!

The current version of this module allows for the control of the following functions:
  • Set output current
  • Switch output on/off
  • Set maximum/minimum current (to protect your equipment)
  • Set current ramping step and time per step (to prevent too fast current changes)
  • Set voltage protection level
Kepco BOP series (via analog voltage from Newport XPS controller) Power supply
Name of module in thaTEC:Core: Kepco_via_XPS
Keysight 33621A waveform generator Pulse generator
Name of module in thaTEC:Core: Keysight_33621A
Keysight 81130 Pulse generator Pulse generator
Name of module in thaTEC:Core: Keysight_81130A_PulseGen

The current version of this module allows for the control of the following functions:
  • Set frequency/period
  • Set pulse width/delay per channel
  • Set high/low voltage per channel
Keysight DSO-X Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope

The current version of this module allows for the control of the following functions:
  • Activate channels
  • Read out traces from activated channels
  • Continuous readout
Keysight E82XX-series RF source (E8241A, E8244A, E8251A, E8254A, E8247C, E8257C, E8267C, E8257D, E8267D) RF source
Name of module in thaTEC:Core: Agilent_E8257D

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set output power
  • Switch RF output on/off
  • Enable pulse modulation
  • Set pulse width/delay/period/rate
  • Dynamically set frequency via remote parameter
Keysight N51XX-series RF source (N5181A, N5182A, N5183A, N5161A, N5162A, N5171B, N5172B, N5181B, N5182B, N5173B, N5183B) RF source
Name of module in thaTEC:Core: Agilent_E8257D

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set output power
  • Switch RF output on/off
  • Enable pulse modulation
  • Set pulse width/delay/period/rate
  • Dynamically set frequency via remote parameter
Keysight N52XX series VNA (N5225A, N5221B, N5222B, N5224B, N5225B, N5227B, N5231B, N5232B, N5234B, N5235B, N5239B, N5230C, N5241B, N5242B, N5244B, N5245B, N5247B, N5249B) Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Keysight_N52xx_VNA

The current version of this module allows for the control of the following functions:
  • Read all S-Parameters (real and imaginary)
  • Set center frequency by equation and device parameter from another device (e.g. Hall-probe)
  • Set start/stop frequency
  • Set number of points
  • Set averages
  • Set output power
  • Switch output on/off
  • Activate traces
  • Take reference
  • Display raw/corrected data (using reference data)
  • Continuous readout
  • Unleveled indicator
Keysight N6700 series (N6776A) Power supply
Name of module in thaTEC:Core: Agilent_N6776A

The current version of this module allows for the control of the following functions:
  • Set current
  • Switch output
  • Set software limits
  • Set voltage protection level
  • Current ramping: set stepsize and timing
Keysight N9010A spectrum analyzer Signal analyzer
Name of module in thaTEC:Core: Keysight_N9010A

The current version of this module allows for the control of the following functions:
  • Set center frequency
  • Set frequency span
  • Set measurement type
  • Display traces
  • Set trace type/trace name/detector type
  • Set average mode and number
  • Set number of sweep points
  • Set input impedance
  • Set amplitude units
  • Set bandwidth
  • Set attenuation and reference level
Kikusui PBZ series Power supply
Name of module in thaTEC:Core: Kikusui_PBZ-Series_PowerSupply

The current version of this module allows for the control of the following functions:
  • Read/set output current
  • Switch output on/off
  • Set software limits
  • Set ramping parameters to prevent too fast current changes
Kymera 193i Detector
Name of module in thaTEC:Core: Kymera_193i
LakeShore 648 Gaussmeter
Name of module in thaTEC:Core: LakeShore_648
LakeShore LS455 Gaussmeter
Name of module in thaTEC:Core: LakeShore_455

The current version of this module allows for the control of the following functions:
  • Read out field value
  • Set field units
  • Set field range
  • Set number of samples
  • Set offset/multiplier
  • Automatic readout
  • Display field value vs. time
LakeShore LS475 Gaussmeter
Name of module in thaTEC:Core: LakeShore_475
LakeShore LS475 including field control for magnet power supply Gaussmeter
Name of module in thaTEC:Core: LakeShore_475_field_control

Remarks: This version includes the field control of an electromagnet via the GPIO connections of the LakeShore 475 module

The current version of this module allows for the control of the following functions:
  • Read field value
  • Read temperature
  • Continuous readout
  • Set target field
  • Set field shift
MadCityLabs Piezo controller Positioning system
Name of module in thaTEC:Core: MadCityLabs

The current version of this module allows for the control of the following functions:
  • Up to 3 axes
  • Read current positions
  • Set velocity
  • Read current action status
  • Move to absolute position
  • Move relative using arrow keys on keyboard
Marzhauser Tango series Positioning system
Name of module in thaTEC:Core: Marzhauser_Tango

The current version of this module allows for the control of the following functions:
  • Up to 3 axes
  • Enable/disable single axis
  • Home axes
  • Read current position
  • Move absolute
  • Set current position as zero
  • Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample)
  • Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements)
  • Calibrate stage
Measurement computing USB-3100 series (3100, 3101) DAQ hardware
Name of module in thaTEC:Core: MeasurementComputing_USB-3101
Measurement computing USB-3101 DAQ hardware
Name of module in thaTEC:Core: MC3101-DoubleChannel

The current version of this module allows for the control of the following functions:
  • Select two output channels
  • Set output voltage for each output channel
National Instruments NI-9264 DAQ hardware DAQ hardware
Name of module in thaTEC:Core: NI-DAQ-9264-AO

The current version of this module allows for the control of the following functions:
  • Set analog output voltage at 16 channels
  • Activate channels in groups of 4 channels
National Instruments NI9402 module for photon counter DAQ hardware
Name of module in thaTEC:Core: NI_9402_PhotonCounter
National Instruments USB-621X USB DAQ modules DAQ hardware
Name of module in thaTEC:Core: NI-DAQ-USB-621X

The current version of this module allows for the control of the following functions:
  • Read analog voltages at 16 channles
  • Activate channels in groups of 4 channels
  • Set analog output for 2 channels
Newport DL-series delay line Delay line
Name of module in thaTEC:Core: Newport_DL-series_Delay-line

The current version of this module allows for the control of the following functions:
  • Move to absolute position
  • Set reference position
  • Move relative to reference position
  • Insert number of reflections to enter target delay in ps instead of microns
Newport ESP301 series Positioning system
Name of module in thaTEC:Core: Newport_ESP301

The current version of this module allows for the control of the following functions:
  • Move to absolute position
  • Set axis velocity
  • Readout current position
Newport SMC100 DC or stepper motor controller Positioning system
Name of module in thaTEC:Core: SMC100_Rotator

The current version of this module allows for the control of the following functions:
  • Rotate to absolute angle
  • Relative rotation
  • Readout current angle
  • Home stage
Newport XPS-series controller (XPS-D, XPS-Q) Positioning system
Name of module in thaTEC:Core: XPS_controller

The current version of this module allows for the control of the following functions:
  • Select group
  • Assign positioners to the axes of a group
  • Display current stage status
  • Initialize/home axes
  • Move to absolute position
  • Set axis velocity
Ocean Optics QE Pro Spectrometer
Name of module in thaTEC:Core: OceanOptics_QEPro

The current version of this module allows for the control of the following functions:
  • Set integration time
  • Set averages
  • Read and display spectrum
  • Display device info (serial number)
PCO camera Camera
Name of module in thaTEC:Core: PCO_camera

The current version of this module allows for the control of the following functions:
  • Read camera image
  • Set exposure time
  • Set temperature setpoint
  • Read current temperature
Physikinstrumente (PI) E710 piezo controller Positioning system
Name of module in thaTEC:Core: PI_E710

The current version of this module allows for the control of the following functions:
  • Move to absolute position
  • Readout travel ranges
Picotech PicoSource Pulse generator
Name of module in thaTEC:Core: PicoSource
Picotech PicoVNA Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: PicoVNA
Picotech Picoscope 9300 series USB oscilloscope Oscilloscope
Name of module in thaTEC:Core: PicoScope9300
RedLab 1608G DAQ hardware
Name of module in thaTEC:Core: RedLab-1608G

The current version of this module allows for the control of the following functions:
  • Read and display input voltage of a single channel in a graph
  • Set output of 2 digital out channels
  • Double shutter mode for output channels
Rohde & Schwarz SMB100A RF source
Name of module in thaTEC:Core: Rohde-Schwarz-SMB100A

The current version of this module allows for the control of the following functions:
  • Set RF frequency
  • Set RF power
  • Switch output on/off
  • Set maximum RF power (to protect your device)
  • Sweep frequency using arrow keys (to find working point)
  • Pulse modulation
SmarAct MCS 1 positioning system Positioning system
Name of module in thaTEC:Core: SmarAct_MCS1

The current version of this module allows for the control of the following functions:
  • Assign axes to channels
  • Read out axis status and current position
  • Set soft position limits
  • Set speed
  • Move absolute or relative (step motion)
  • Home stage
SpinCore PulseBlaster USB version Pulse generator
Name of module in thaTEC:Core: SpinCore_PulseBlaster
Stanford Research Systems (SRS) DG645 delay generator Pulse generator
Name of module in thaTEC:Core: SR_DG645

The current version of this module allows for the control of the following functions:
  • Enable/Disable AB output
  • Set delay time
  • Set pulse duration
  • Set level
  • Set level offset
  • Set polarity
  • Set trigger source
  • Set trigger rate
  • Set trigger level
  • Enable/disable burst mode
  • Set burst configuration (burst count/burst period/burst delay)
Stanford Research Systems (SRS) SR830 Lock-in amplifier
Name of module in thaTEC:Core: SR_830
Stanford Research Systems (SRS) SR86x-series lock-in,SR860,SR865 Lock-in amplifier
Name of module in thaTEC:Core: SR86x_Lock-in

The current version of this module allows for the control of the following functions:
  • Set signal input type
  • Set sensitivity/current input gain/shields/coupling/range/mode
  • Set sine out level mode/offset/amplitude
  • Set time constant/filter slope/internal reference frequency/harmonic/phase/auto phase
  • Read X/Y/R/Theta values and display them simultaneously in individual graphs
Suruga DS102 setpper motor controller Positioning system
Name of module in thaTEC:Core: Suruga_DS102

The current version of this module allows for the control of the following functions:
  • Device settings: Resolution and driver devision
  • Read out current position
  • Home stage
  • Set software travel limits
  • Read out hardware travel limits
  • Go to position
Swabian Instruments DLnsec pulsed lasers Laser
Name of module in thaTEC:Core: Swabian_Instruments_DLnsec_Lasers
Swabian Instruments Pulse Streamer Pulse generator
Name of module in thaTEC:Core: PulseStreamer
Swabian Instruments Time Tagger (TR-BLS) Timeresolution
Name of module in thaTEC:Core: TimeTagger_2.6.6

Remarks: For Time Tagger with firmware version 2.6.2 and newer.

Requires thaTEC:TFPDAS for time-resolved Brillouin light scattering measurements.
Swabian Instruments Time Tagger module for countrates Timeresolution
Name of module in thaTEC:Core: TimeTagger_counter

Remarks: Only for Time Tagger with firmware 2.4.X
TableStable Tandem Fabry-Perot interferometer (TFP-1, TFP-2) Signal analyzer
Name of module in thaTEC:Core: TFPDAS
Tektronix 2000 Multimeter
Name of module in thaTEC:Core: Keithley_2000
Tektronix 2182A Nanovoltmeter Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Tektronix 2200xx-series multi channel lab power supplies,2231A-30-3 Power supply
Name of module in thaTEC:Core: Keithley_22XX-series_power-supply

The current version of this module allows for the control of the following functions:
  • Set output value and switch output of all channels individually
Tektronix 22xx series (2220, 2230, 2231) Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix 2400 series Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Tektronix 2614B Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B

The current version of this module allows for the control of the following functions:
  • Enable/disable outputs
  • Switch mode for each output
  • Set current/voltage for each output
  • Set current range/voltage limmit for each channel
  • Set maximum/minimum current for each channel
  • Read resistance for each output
  • Plot resistance over time
  • Export time-resistance plots
Tektronix 6200 series (6221) Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Tektronix AFG3000C-series Pulse generator
Name of module in thaTEC:Core: Tektronix_AFG3000C_series_FunctionGen

The current version of this module allows for the control of the following functions:
  • Individual control of both channels
  • Select waveform
  • Set frequency
  • Set Amplitude/Offset
  • Set Phase
  • Switch output on/off
Tektronix DMM 6500 Multimeter
Name of module in thaTEC:Core: Keithley_DMM_6500_multimeter

Remarks: current

The current version of this module allows for the control of the following functions:
  • Read and display voltage/current
  • Plot values over time
  • Set auto or manual range
  • Set input impedance
  • Set function (voltage DC/AC
Teledyne LeCroy HDO-series Oscilloscope
Name of module in thaTEC:Core: TeledyneLeCroy-HDOseries_Oscilloscope

The current version of this module allows for the control of the following functions:
  • Read out all 4 channels
  • Read out 4 function channels
  • Set Functions (Envelope/Floor/Roof) for each channel
  • Set averaging
  • Trigger Auto setup
Thorlabs Camera Camera
Name of module in thaTEC:Core: ThorlabsCam

The current version of this module allows for the control of the following functions:
  • Display camera image
Thorlabs Elliptec Piezoelectric motors Positioning system
Name of module in thaTEC:Core: Thorlabs_Elliptec

The current version of this module allows for the control of the following functions:
  • Module currently supports 2 sliders and 1 rotator simultaneously
  • Set position of each slider
  • Set angle for rotator
  • Jog rotator with adjustable stepsize
Thorlabs K-Cube Solenoid controller (KSC101) Positioning system
Name of module in thaTEC:Core: Thorlabs_KSC101
Thorlabs K-cube brushed DC servo motors (KDC101) Positioning system
Name of module in thaTEC:Core: Thorlabs_KDC101
Thorlabs K10CR1 Rotation stage
Name of module in thaTEC:Core: Thorlabs_K10CR1_Rotation_mount

The current version of this module allows for the control of the following functions:
  • Set target position in degree
  • Read position in degree
Thorlabs Kinesis software module Positioning system
Name of module in thaTEC:Core: Thorlabs_Kinesis

Remarks: Available functions depend on the connected device.
Thorlabs PM-series powermeter (PM100A, PM100D, PM100USB, PM101 Series, PM102 Series, PM103 Series, PM16 Series, PM160, PM160T, PM160T-HP, PM200, PM400) Powermeter
Name of module in thaTEC:Core: Thorlabs_PM-series_Powermeter

The current version of this module allows for the control of the following functions:
  • Set wavelength
  • Read current power
  • Plot power over time
Thorlabs Thorlabs MDT69XB stage controller Positioning system
Name of module in thaTEC:Core: Thorlabs_MDT69XB

The current version of this module allows for the control of the following functions:
  • Set x
  • y
  • z position
  • Adjust velocities
Toptica iBeam smart series Laser
Name of module in thaTEC:Core: Toptica_iBeam_smart

The current version of this module allows for the control of the following functions:
  • Set laser power
  • Switch laser on/off
  • Read laser power
  • Read drive current
  • Read laser status (power on
  • laser on
  • channel 1 on)
Velmex VXM series Positioning system
Name of module in thaTEC:Core: GMW_Velmex_MotionControl

The current version of this module allows for the control of the following functions:
  • Read and set absolute position of all 4 axes
  • Indicator if stage is homed
  • Relative movement relative to defined position